Point-and-Figure-Chart-7.png image-25.png 💥The Point-and-Figure diagram is a popular tool among technical analysts and traders for charting price movements in financial markets. It is a type of chart that uses X\u0027s and O\u0027s to represent upward and downward price movements, respectively, and is widely used for identifying trends and patterns. 💥One of the key techniques that traders use in Point-and-Figure charting is drawing trend lines to identify support and resistance levels. A trend line is a straight line that connects two or more points on a chart and can help traders identify the direction of a trend and potential price targets. 💥To draw a trend line in Point-and-Figure charting, traders must first identify two or more significant highs or lows on the chart. These points are then connected using a straight line, with the line being extended to the right to identify potential price targets. 💥When drawing a trend line, it is important to ensure that it is not drawn too steeply or too shallowly. A steep trend line may not provide reliable support or resistance levels, while a shallow trend line may not accurately reflect the direction of the trend. 💥Traders can use trend lines in Point-and-Figure charting to identify potential price targets. When a trend line is broken, it can be an indication that the trend is reversing and that a new price target may be emerging. Traders may use other technical analysis tools, such as moving averages or momentum indicators, to confirm the trend and identify potential entry and exit points. 💥In addition to trend lines, traders can also use other technical analysis techniques in Point-and-Figure charting to identify potential price targets. These include identifying patterns such as double tops or bottoms, triple tops or bottoms, and bullish or bearish flags. 💥Double tops or bottoms occur when two consecutive columns of X\u0027s or O\u0027s reach the same level and fail to break above or below it. This can be an indication of a potential trend reversal and may be used by traders to identify potential price targets. 💥Triple tops or bottoms occur when three consecutive columns of X\u0027s or O\u0027s reach the same level and fail to break above or below it. This can be an even stronger indication of a potential trend reversal and may provide traders with more reliable price targets. 💥Bullish or bearish flags occur when there is a sharp price movement followed by a period of consolidation. These patterns can be used by traders to identify potential price targets once the price breaks out of the consolidation phase. 💥💥Drawing trend lines and identifying potential price targets is an essential part of technical analysis in Point-and-Figure charting. Traders should use a combination of tools and techniques, including trend lines and pattern recognition, to identify potential entry and exit points and manage their risk. While no single technique can guarantee success, combining multiple techniques can increase the likelihood of making informed trading decisions. 👉Trend Lines👈 💥In addition to the above, trend lines at a 45-degree angle are also introduced in point-and-figure charting to help determine the current trend. These lines can be used as filters in providing trading signals. Here\u0027s how to draw them: 💥In an uptrend, the trend line is called the bullish support line and is drawn at a 45-degree angle up to the right. Start from the square below the end of the O symbol and move down one square, as shown in the example picture. As long as the price stays above that line, the trend is still considered bullish. 💥Conversely, in a downtrend, the trend line is called the bearish resistance line and is drawn at a 45-degree angle down to the right. Start from the box that is above the top of the X symbol and move up one box, as shown in the example picture. As long as the price is below the downtrend line, the trend is still considered bearish. 👉Price Targets👈 💥Although the above studies have led traders to various buying or selling signals, a trader may wonder where the buy or sell signal is, and where to enter or exit to make a profit before the trend changes. One method that can be used to solve such problems is to set price objectives, which can be done in two ways: Horizontal count: The basic principle behind this method is that the time interval a stock takes to consolidate is important in determining its potential move. Therefore, the spread width is used to forecast price levels for an upward or downward movement. To adapt to the test, the formula for finding price targets in the event of a rising price is: Hu = PL + (W X RV) Where: Hu = target price level PL = the lowest price (from the O symbol) used as the basis for the calculation W = the number of columns used as the basis for the calculation RV = reversal value = (box size X the number of boxes) The price level used as a base must be clearly identified. The column count or W value excludes the breakout column. RV is the minimum reversal. The formula used to find the target in the event of a declining price is: Hd = PH - (W X RV) Where: Hd = target price level PH = the highest price (from the X symbol) used as the basis for the calculation W = number of columns used as a basis for the calculation RV = reversal value Vertical count: This method is simpler than the first method. The formula used to find price targets for an upward movement is: Vup = minimum base price + (number of boxes in the first reversal X RV) The formula used to find price targets for a downward movement is: Vdown = highest base price - (number of boxes at first reversal X RV) 💥With the principles mentioned above, whether it\u0027s about creating a diagram or the form that will give a buy or sell signal, this technical analysis tool called Point and Figure charting should provide beginner traders with the right methods and strategies to reduce risk before entering the market to trade seriously.
💥Learning to observe Slopes and Retracement A novice trader should have some basic knowledge in this regard as well. In order to use it as a tool to find a time to buy or sell. Be it the Forex, bitcoin, crypto market or the stock exchange in general, the same principles apply to technical analysis. speed_lines.png 💥 Okay, even though we know the trend and the change in trend, and have identified preliminary trading signals, being overly confident might not always be beneficial. Reversals are crucial and highly valuable in technical analysis. This is because they refer to the slope correction, or what is called the \"slope zz\" of the trendline in Western terminology. LNSeD05x_mid.png From Figure 1, it can be seen that the trend has many lines and the trend is adjusted to different angles. It is not that the trend has only one line and cannot be dragged by others. The rules for drawing the line There may be a variety of methods but the most popular should understand the rules of adaptation also known as retracement. fan_basics.png 💥 In Figure 3, it can be seen that when the price reaches a certain level, for example, 100 euros, there is a decrease. At this level, the price should have the opportunity to rebound to the original trend at approximately 38%, 50%, or 61%. If the price drops after going up 100€, it should bounce back after going down 38€ (38%). If it keeps going down, the next support will be at 50€ (50%), and it should rebound. However, some technical analysts do not give as much importance to the 50% level as the 38% and 61% levels. It should not be more than 61€ (61%) because the chances of the trend changing from an uptrend to a downtrend are already very high. Therefore, one should prepare for the trend reversal. 💥This rule is applied to create a speed line (Figure 3), which is a trend line with its own set of rules. The height is divided into three parts from the point where the price is currently moving (1) to the base level where the starting point rests. This creates two trend lines: one showing the 38% level and the other showing the 61% level. This is just one example of optimizing the trend line. 💥The trend lines drawn have different slopes depending on the situation. However, every time the share price weakens and goes down to the support line from the trend line, it has rebounded at least once, also known as a rebound. Some people may use this as a moment to exit the market by selling their stocks. This is suitable if the trend is a downtrend. But if the trend is an uptrend or is about to change from a downtrend to an uptrend, anyone who exits the market may regret it because once they sell, the share price often surges higher than the selling price. Therefore, selling should be considered at the right time.
💥However, doing the analysis Knowing only the above pattern may not be enough Since sometimes we need to set point of buying and selling point, how do we know when to buy? While the trend is an uptrend, the answer that many people would say would be BUY ON SLOW. I would continue to ask: How much downward is acceptable in an uptrend? The main or method to solve such problems is Using trend lines, this will be your tool. Values ​​for trend analysis From above we have separated the trend into 3 types, so there are 3 types of trend lines to be used as follows: UptrendSampleImage.png 👉 1. Uptrend line The principle is not difficult at all. That is to say, the beginning We will draw a line from point 1 to point 3 (red dot) leaving the end of the line past point 3. This line is the uptrend line for the significance of this line. Or simply whether the leather is tough enough or not, it starts at the number 5 (red dot), which if the price can rebound at the number 5, that would indicate a significant uptrend line. If the price has adjusted down near this line again. It will use the predicted level on this line. Is the point used in Entering the spoon to receive shares again, such as number 7 (red dot) DowntrendSampleImage.png 👉 2. Downtrend line The principle is reversed from the above in the sense that the line will use the old peak and the new peak as a point in the draw line, starting from point 1 to point 3 (red point) (if observed, it will find that the point 1 and 3 here are the vertices, as opposed to in the case of uptrends, which are the bottoms.) That\u0027s the difference in trend line formation. In terms of uptrend and downtrend, the measure of significance is looked at number 5. (red dot) If the stock price fails to cross the up downtrend line and has a downtrend following it, we call this downtrend line significant. This line again at point 7 (red dot) is the level where a sell-off is expected. If point 7 (red dot) still fails to break through the downtrend line, it will strengthen the downtrend line even more. trend-channel-780x482.png 👉 Parallel line, In addition to the trend line mentioned above There are times when it is necessary to create a parallel line for the reason that there are cases when the price is clearly moving within the framework of the parallel line. Thus giving rise to a technical term came up another word is channel (hereinafter called flow pipe) I don\u0027t know if it will make the picture clearer or not? The principle of drawing parallel lines is not difficult at all. From the picture, use point 2 (green dot) as a starting point. Then draw a line parallel to the uptrend line, as shown in the figure, using point 2 (green dot) as the starting point parallel to the downtrend line, which will act as resistance in the uptrend form and will act as a resistance line. Support for downtrend images. SidewaysTrendSampleImage.png 👉 3. Sideways is movement without direction. Is not markedly So the trend line in the case of sideways is relatively smooth, parallel to the ground (flat) and the channel in the case of sideways is like Pipes placed parallel to the floor, see from the picture because it can be seen that the flow of prices or index will be under the formation of a flow that lies horizontally which the price movement along the flow pipe sideways horizontally like this It is the origin of the name sideways. trends-and-channels-1606726702.png