9eb85c0b550e1877ce51e70db80f52ea--to-read-charts.jpg d0abd6ee-f31c-4e01-95dc-cd03de9f4eae.png b09223ca-7e94-42ac-b1e7-a769735a6b19.png Point-Figure-Chart-Explained.jpg In Point-and-Figure charting, traders can look for several buy and sell signals based on support and resistance levels: Bullish signal: A buy signal occurs when the price breaks above a resistance level, creating a new column of X\u0027s. This indicates that the buyers have gained control and the price is likely to continue to rise. Bearish signal: A sell signal occurs when the price falls below a support level, creating a new column of O\u0027s. This indicates that the sellers have gained control and the price is likely to continue to fall. Double top pattern: A sell signal occurs when two consecutive columns of X\u0027s reach the same level and fail to break above it. This indicates that the buyers are losing momentum, and a reversal may be imminent. Double bottom pattern: A buy signal occurs when two consecutive columns of O\u0027s reach the same level and fail to break below it. This indicates that the sellers are losing momentum, and a reversal may be imminent. Triple top pattern: A sell signal occurs when three consecutive columns of X\u0027s reach the same level and fail to break above it. This indicates that the buyers are struggling to push the price higher, and a reversal may be imminent. Triple bottom pattern: A buy signal occurs when three consecutive columns of O\u0027s reach the same level and fail to break below it. This indicates that the sellers are struggling to push the price lower, and a reversal may be imminent. 👉 Traders can also look for other patterns, such as bullish and bearish flags and wedges, which can provide additional buy and sell signals. However, it\u0027s important to note that no single pattern can guarantee success, and traders should use other technical analysis tools and risk management strategies to make informed trading decisions. 💥In this section, we will delve deeper into the patterns of buy and sell signals that can be observed in the Point-and-Figure diagram. There are many patterns that traders use for technical analysis, but we will focus on two examples: the buy signal on the breakout of a triple top and the sell signal on the downside breakout below a bullish support line. 💥Understanding the principles behind buying or selling signals makes it easy for traders to recognize any pattern formation. In the case of a buy signal, a breakout of resistance occurs after the third peak. Breaking through resistance, according to the principles of support and resistance, indicates a buy signal. The next question is how to identify resistance. The answer lies in the peak of the last two X signals, which turn into O signals indicating selling pressure greater than buying pressure, hence forming a resistance line. When the X signal crosses above, it indicates that demand outstrips supply, resulting in the price rising and a buy signal being generated. 💥On the other hand, the sell signal occurs when the price breaks the support line on the downside, indicating that selling pressure is greater than the support along the trend line or that there is an oversupply, which inevitably leads to a price drop. Traders who used to buy along the trend line are unable to continue buying, due to the increase in selling pressure, which triggers further selling. Thus, a sell signal is generated. 💥However, it is important to note that the breakout point may not always result in an immediate buy or sell signal. Moreover, it is said that the ascending triple top gives the most reliable buy signal, while the breakout of the triple bottom gives the most reliable sell signal. But the level of trust in these signals may vary from trader to trader, and it is ultimately up to each trader to determine their own level of confidence in these patterns.
PointAndFigure.png To make a Point-and-Figure diagram and use technical analysis to take advantage of chart trading, you can follow these steps: Select a reliable charting software that provides Point-and-Figure charting tools. Choose the security you want to analyze and set the time frame. Determine the box size and reversal amount. Box size is the minimum price movement required to draw a new X or O on the chart, while the reversal amount is the number of boxes required to change the direction of the trend. Plot the X\u0027s and O\u0027s on the chart based on the price movements. X\u0027s represent an uptrend, and O\u0027s represent a downtrend. Look for patterns on the chart, such as double tops or bottoms, trendlines, and support and resistance levels. Use technical analysis indicators, such as moving averages or relative strength index (RSI), to confirm the trend direction and identify potential entry and exit points. Determine your trading strategy based on the analysis, and set your stop-loss and take-profit levels accordingly. 👉 It\u0027s important to remember that Point-and-Figure charts are just one tool among many in technical analysis, and that no single tool or chart can guarantee success in trading. It\u0027s also important to practice and refine your analysis skills through continuous learning and experience. 💥At this point, we should have started learning how to create a point and figure diagram on a chart. The equipment required to create a diagram is a graph book, which has a square grid that was used during childhood to graph. Although some people may say that computers and diagramming programs such as Points and Figures are available, why bother learning it? Is it obsolete? In our opinion, understanding the basic principles would not cause any harm. First, gain knowledge and expertise, and then use a computer to help create a diagram. However, for those who are more proficient and believe that computer-generated diagrams can sometimes be challenging to read because the image is too small, there may be a way to solve this problem. 💥The first step in creating a diagram is setting the size of the box (box size) such that each box is equal to the amount of price change or spread in stock trading. For instance, if the stock price fluctuates between 5 and 80 euros, the box size will be 5 euros, which is equal to the change in stock price when trading. 💥However, in practice, the box size is set at the trader\u0027s discretion. To analyze data effectively, it can be used as a guide. It should be noted that the box size affects the sensitivity of the change in price direction. If the value is less, the change in direction will be faster. Therefore, the size of the box should be related to the range used in the chart for trading. For instance, if one wants to study long-term price movements, the box size should be larger than usual. 💥The second step is to understand how to enter prices into the table and the rules that must be followed to create a diagram. This requires knowledge of the rules along the way. Consider the following example: 💥Suppose the stock price is currently 15 euros. We record the value of 15 euros using the X or O symbols, not as a numerical value. If the price moves up, the X symbol is used, and if it moves down, the O symbol is used. For instance, if the price moves up to the highest price level of 40 euros and closes at that level, we will have 6 X symbols because each box used to record the X value has a box size of 5 euros. When the maximum price changes to 30 euros, six X\u0027s are added. 💥On the other hand, if the stock price falls from the price level of 35 euros to the lowest price of 10 euros and closes at that level, the O symbol will be used to record the value. 💥Once we understand which symbols are used in which cases, we can explain the case when the stock starts with the X row first, assuming that the price is still rising the next day with a maximum price of 65 euros. In this case, we need to record prices up to the price level of 65 euros. However, if the highest price on the third day does not exceed the highest price (65), we need to consider whether the Day 3 Low is below the High (65) for at least three price movements. If the minimum price of 55 euros is not less than three periods of price change, worth 10 euros, we don\u0027t record anything. On the other hand, if the lowest price on the third day is 15 euros, which is below 65 euros and down more than 15 euros, we start recording the O symbol in the column to the right of the X column starting. point-and-figure-4.jpg 💥You may be wondering why 15 euros is used as a criterion and how the X symbol is changed to an O. Well, it\u0027s actually a popular rule called Three-box reversal, which is derived from three times the box size. In this case, the box size is equal to 5 euros, so the Three-box reversal is equal to 15 euros. However, this rule can be changed to any value other than three times the box size, as long as it is looked at carefully. If the rule is changed, does the resulting diagram have any significance in terms of price movements? Can it provide a reliable buy or sell signal? If it works better, no one would forbid it! 💥Another thing to note is that in point and figure charting, the closing price is not taken into account. Only the highest and lowest prices are recorded. If on day 1, the column has an O instead of an X, it is because the price dropped from 60 euros to 45 euros. If the lowest price on day 2 is 15 euros, we continue to record the symbol O down to 15 euros. However, if the lowest price on day 3 is also 15 euros, which is not lower than the lowest price (15), we need to consider if the highest price is a Three-box reversal. If the highest price on the 3rd day is 20 euros (still lower than 15 euros), there\u0027s nothing to do. But if the highest price on the 3rd day is 70 euros, then the reversal starts. We record the symbol X in the column immediately to the right of column O and start in the address field higher than that of the symbol O (as shown in the example picture). 💥However, sometimes the price dynamics are quite wide. For example, the high on the 10th day may be higher than the high currently being recorded on day 9. But if we follow the rules and look at the lowest price on day 10, it may be worth more than a Three-box reversal. In this case, we continue to record the X symbol until the maximum achieved on the 10th day, regardless of the resulting minimum. However, doing so may ignore what could be a significant reversal signal. So we can either move the column to the right to save the O symbol or use the fish method to go down instead of using the O signal as a warning of a significant reversal during the day.
1*03ly9-LoF1WLHXsxPcVEPQ.png 💥Point-and-Figure (P\u0026F) diagrams are a type of chart used in technical analysis to plot price movements without regard to time. The chart is made up of a grid of X\u0027s and O\u0027s, with X\u0027s representing upward price movements and O\u0027s representing downward price movements. The X\u0027s and O\u0027s are arranged in columns, with each column representing a set price range or \"box size.\" 💥The chart is used to identify trends and support and resistance levels, and can be particularly useful for longer-term analysis. P\u0026F charts are based on the idea that prices move in trends, and that these trends are defined by a series of higher highs and higher lows in an uptrend, or lower highs and lower lows in a downtrend. 💥P\u0026F charts can also be used to generate buy and sell signals, such as when a new column of X\u0027s or O\u0027s appears, or when a trendline is broken. Additionally, P\u0026F charts can be used in conjunction with other technical analysis tools, such as moving averages and trendlines, to confirm trading decisions. 💥One potential drawback of P\u0026F charts is that they can be more difficult to read and interpret than other types of charts, particularly for beginners. However, with practice and experience, many traders find that P\u0026F charts can be a valuable tool in their technical analysis toolbox. point-and-figure-chart.jpg 💥The Point-and-Figure diagram is a popular method of technical analysis. The format of the diagram is quite different from the bar charts typically used in technical analysis because bar charts show time on the horizontal axis. With a bar chart, we can easily see the highest and lowest opening and closing prices of a particular day, and one bar chart represents trading for one day (for daily charts) or one week (for weekly charts), which is fixed. 💥However, with the Point-and-Figure diagram, price action is represented by the letters O and X, as shown in the example figure. Although the resulting graphs may look like bars, we cannot determine how long each bar lasts because the price action remains the same for as long as there is no change or reversal, and one bar may display data for several days. This compression mechanism filters out random price movements or noise, which is not related to the trend, providing us with a clearer picture of the trend.